4 Ways To Run Computer Performance Benchmark Test on Windows 10/11

Run Computer Performance Benchmark Test on Windows 10/11

With usage, a time comes when the PC users need to upgrade their systems. Either to improve the performance, declutter it or expand its memory. But before doing so it is very important to know the current scenario of the PC. To find and fix the existing issues.

While, its not too difficult check the computer performance. However if you are just not a tech savvy, or find testing around the system internal settings a bit hard job. Then, here we will guide you how you can do it both manually and by using a powerful tool.

There are various ways to run computer performance benchmark test on Windows 10/11, without actually taking it to a professional. In fact, Windows OS has some built-in diagnostic tools that will help you know what exactly happening to your PC. Also, there are some pretty good third-party software tool that are entirely designed to find and repair the Computer issues.

How To Run Computer Performance Benchmark Test On Windows 10/11

When you start to feel that your computer has turn out to be sluggish, or you getting unknown errors while working. Then, may be its the time to drill down few things about your system.

  • Often a simple reboot can fix various issues of your system.
  • Secondly, its may be any outdated drivers that is causing the issue, so go on update your drivers.
  • Check if your system has some pending updates, if so then don’t delay further.
  • Run a system cleaner Tool like System Mechanic Ultimate Defense to remove junk, logs, unnecessary files, startup issues, registry errors and many so. It shows PC health status, memory, disk, and also recommends what should you do to improve your system performance.
    SMUD Scan And Repair Windows Issues
    SMUD Scan And Repair Windows Issues

If you have already tried these actions, to improve the system performance, then its time to run benchmarking test.

Benchmarking test refers to a method where a full diagnostic test will be run on the system, depending on various parameters like software, hardware, network and many more. This helps analyze the the system performance, hardware and overall health. Also, you can choose to run a battery life report of your Windows 10, if your battery is draining quickly.

  • Running Performance Monitor Tool
  • Using Command Prompt
  • Using Windows PowerShell
  • Third-Party Software

Method 1: Running Performance Monitor Tool

Windows OS has built-in benchmark test tool known as “Performance Monitor“.

What is Performance Monitor On Windows OS?

Performance Monitor is an in-built utility of Windows OS that helps running full system diagnostic scan to check computer performance. After scanning, you will get report about the app, hardware, software, processor and so on. Thus, helping you to gather correct data about your system health and fix the performance related issues.

How To Run Performance Monitor On Windows 10?

  • The easiest way to launch Performance Monitor tool is to press (Windows Key + R) on your keyboard and then type "perfmon";
    Run Performance Monitor On Windows OS
    Run Performance Monitor On Windows OS
  • Or, you can click on Start Menu, and start typing “Performance Monitor” and click on the results;
  • Once the Performance Monitor window opens, you will see a brief about your System summary including: memory, network interface, physical disk, and processor information.
    Performance Monitor
    Performance Monitor
  • On the left navigational menu,  you will see options: Performance Monitor, Data Collector Sets, and Reports.
  • Next, click on “Performance Monitor“, you see a processor counter that loads real-time data of the processor load within every 100 seconds. You can also add other counters, to get the real-time information by clicking on the green plus icon on top menu.
    Real-time data of the processor
    Real-time data of the processor
  • To generate Data Collection sets, you can either choose to manually generate the report or use the system defined one.

How To Generate User Defined Data Sets And Report

  • Expand Data Collector Sets.
  • Next, right-click on “User Defined” > New > Data Collector Set.
    Creating User Defined Data set
    Creating User Defined Data set
  • Create a name for your new data set and select the Create manually (Advanced) option, and click on “Next“;
    Create User Defined Data set
    Create User Defined Data set
  • Select Create data logs and click on the Performance counter option, you can choose other options too and click Next.
    Choose Performance Counter
    Choose Performance Counter
  • Click to add the performance counters, and choose “All Instance” click the Add button, click on OK and then Next.
    Choose Performance Counter Instances
    Choose Performance Counter Instances
  • Now, you can either leave the data set as “default” settings or choose a different location, click Next and then choose the Save and Close option, finally click on Finish.
    Run Default User Data Collector Set
    Run Default User Data Collector Set
  • Now, you will see your data set will custom name will be generated under the “User defined” section.
    New User Defined Data set is created
    New User Defined Data set is created
  • Choose your dataset name, right-click on it to start collecting report. It will take few minutes to generate it.
  • After that, from left-menu, expand “Reports“, choose your dataset to view it.
    View Data Set Report
    View Data Set Report

How To Run System Diagnostics And System Performance Report?

Apart from that, you can also choose from pre-defined Data Collectors Sets by Windows 10 to analyze the system performance. These are located under the “System” menu:

  • System Diagnostics: Gathers the detailed report about the system information, like basic system checks, OS checks, disks, Network, performance, CPU and hardware and many more.
    • To run System Diagnostics, expand System > System Diagnostics > Start;
      Run System Diagnostics
      Run System Diagnostics
    • Wait till the scan is completed and system generates the report.
    • Now, go to report and click on Reports > System Diagnostics > Click on the report you see.
      System Diagnostics Test Report On Windows 10
      System Diagnostics Test Report On Windows 10
  • System Performance: Helps generating a report about the local hardware resources, system response times, and processes on your computer. You can use this report to identify the possible causes of performance issues.
    • To run System Performance, expand System > System Performance > Start
    • Wait till the scan is completed and system generates the report.
    • Now, go to report and click on Reports > System Performance > Click on the report you see.

Method 2: Using Command Prompt

Every Windows OS user knows that power of Command Prompt, a line of code can make things faster and easier. Here is the ultimate list of Windows System Run Commands For Windows 7, 8 and 10.

  • Open Command Prompt in admin mode, press (Win Key + S), type “Command Prompt“, right-click and choose “Run As Administrator“;
  • Once the Command Prompt window opens, type “winsat prepop” and press enter. The cmd will start executing the command and will check for parameters like CPU performance, GPU, disk usage, and many more;
    Run Benchmarking Test Via Command prompt
    Run Benchmarking Test Via Command prompt
  • After completion the test, you will see a report of how your system is performing.

Method 3: Using PowerShell

Similar to Command Prompt, the Power Shell is also a powerful utility that works as a chime for many things. When, it is running benchmarking tests for Windows OS, you can follow the below steps:

  • Click on Start menu, type “PowerShell“, and choose “Run As Administrator“;
  • When the PowerShell window opens, type the following command Get-WmiObject -class Win32_WinSAT and hit enter;
  • After the tests are complete, it will present score out of 10 related to CPU performance, Graphics, disk usage, memory, storage and so on.
    Run Benchmarking Test Via PowerShell
    Run Benchmarking Test Via PowerShell

Method 4: Third-party Software

If you are not satisfied with the above benchmarking tests, or want to gather some specific information about your CPU, memory and hardware, then you can use the below software.

CPU-Z For Running Benchmarking Tests on Windows OS
CPU-Z For Running Benchmarking Tests on Windows OS

CPU-Z is a free benchmarking software for Windows OS that helps you gather information about your processors, chipset, memory, module specifications (SPD), as well as real-time tracking of memory configuration and frequency of internal core processes.  The software also has an Android version too.

So, there were the 4 ways to run computer performance benchmark test on Windows 10/11. By doing so you might be surprised at what a simple diagnostic test on your PC can help you take an informed decision of upgrading RAM, processor or its the time buy a new system.

Here are our recommendation on Best Windows 11 Laptops:

Affiliate Disclaimer: TechGeekSpace is supported by our readers, so when you purchase from our recommended links, we earn a commission, with no extra cost to you. 

Admin

Nupur is a tech writer at TechGeekSpace. She loves exploring latest tech, gadgets and have been writing on various topics related to technology, software, Gadgets, Windows, Mac, Internet, Android, and the latest tips and tricks.

Leave a Reply

Your email address will not be published.